DDI
Source Driver IC
Source driver LSI for AMOLED panel
- 768/640ch driving output channels
- EPI interface: Embedded clock Point to point interface.
- : Lock signal cascading and feedback to T-Con
- : Embedded Control Data
- : Maximum Bandwidth: 1.61Gbps/pair
- : Embedded termination resister
- 1024 gray scale per output
- Adoption of LbR port for easy OLED wiring OLED compensation function
- 192/160 compensation channels
- Embedded 10bit ADC with 11MHz sampling rate
- 100Mbps bLVDS Tx to transfer the 10bit data to MCU Power supply voltage
- Analog HV: 12 to 18V
- Low voltage for logic, ADC, & EPI: 1.62 to 1.98V Only COF (Chip On Film)
Gate Driver IC
Target Mode : AMOLED APPLICATION
Operation frequency: Maximum 400kHz (2.5us line time)
Output channels: 432/360 outputs
Gate line voltage: MAX. 40V
- Positive output voltage : VGH = 10 ~ 35V
- Negative output voltage : VGL-VSS = -5 ~ -12V
Supply voltage for Logic Signal : 2.7V ~ 3.6V
Supply voltage for Logic Signal : 2.7V ~ 3.6V
Function
- Internal POR (Power-on Reset) Circuit Adopted
- Bi-directional Shift Registers Adopted
- Output Masking Function Adopted
- Symmetrical Input Pin Allocation for Gate PCB_less Application
- Shift by three or four stages and many drive algorithms for AMOLED TV
PKG : COF(Chip On Film) OR COG(Chip On Glass)
PKG : COF(Chip On Film) OR COG(Chip On Glass)
